5 Axis Rotary Table

Home > Products > 5-Axis CNC Rotary Table

Pneumatic locking system

Servo motor position is not changed with shaft tilting to prevent vibration while cutting.

Specification Unit: mm

5 Axis Rotary Table TRNC-125
Model		TRNC-125
Worktable diameter		125
Table height (horizontal position)		236
Overall height (vertical position)		260
Table center height (vertical position)		150
Center bore diameter		25 H7
Spindle hole diameter		25
Width of T-slot		12 H7
Width of guide-block		14 h7
Servo motor (FANUC)		Rotary	Inclination
		2/3000	2/3000
Servo motor (Mitsubishi)		HA-33NT	HA-33NT
Total seed reduction ratio		1:90	1:180
Minimum input increment		0.001°
Table rotation speed		33.3r.p.m	16.6r.p.m
Load capacity	0° tilting angle (kg)	50
	0°~90° tilting angle (kg)	35
Allowable turntable torque		8kg.m
Max. diameter of workpiece		125
Clamping torque (pneumatic pressure 5kg/cm)		8.5kg.m Pneumatic pressure	17kg.m Hydraulic Pressure
Rotation axis	Indexing accuracy	40"
	Repeatability	4"
Inclination axis	Indexing accuracy	60"
	Repeatability	4"
	Tilting angle	- 40° ~ +120°
Net weight		140kg
* Note: The length of servo motor guard plate varies with different servo motors.

5 Axis Rotary Table TRNC-170
Model		TRNC-170
Worktable diameter		170
Table height (horizontal position)		264.5
Overall height (vertical position)		388.5
Table center height (vertical position)		189.5
Center bore diameter		35 H7
Spindle hole diameter		35
Width of T-slot		12 H7
Width of guide-block		18 h7
Servo motor (FANUC)		Rotary	Inclination
		3/3000	3/3000
Servo motor (Mitsubishi)		HA-33NC	HA-33NC
Total seed reduction ratio		1:90	1:120
Minimum input increment		0.001°
Table rotation speed		33.3r.p.m	25r.p.m
Load capacity	0° tilting angle (kg)	50
	0°~90° tilting angle (kg)	35
Allowable turntable torque		15kg.m
Max. diameter of workpiece		170
Clamping torque (pneumatic pressure 5kg/cm)		16kg.m Pneumatic pressure
Rotation axis	Indexing accuracy	20"
	Repeatability	4"
Inclination axis	Indexing accuracy	60"
	Repeatability	4"
	Tilting angle	- 35 ° ~ +120°
Net weight		150kg
* Note: The length of servo motor guard plate varies with different servo motors.

5 Axis Rotary Table TRNC-210
Model		TRNC-210
Worktable diameter		210
Table height (horizontal position)		264.5
Overall height (vertical position)		388.5
Table center height (vertical position)		189.5
Center bore diameter		45 H7
Spindle hole diameter		45
Width of T-slot		12 H7
Width of guide-block		18 h7
Servo motor (FANUC)		Rotary	Inclination
		3/3000	3/3000
Servo motor (Mitsubishi)		HA-33NC	HA-33NC
Total seed reduction ratio		1:90	1:120
Minimum input increment		0.001°
Table rotation speed		33.3r.p.m	25r.p.m
Load capacity	0° tilting angle (kg)	50
	0°~90° tilting angle (kg)	35
Allowable turntable torque		15kg.m
Max. diameter of workpiece		210
Clamping torque (pneumatic pressure 5kg/cm)		16kg.m Pneumatic pressure
Rotation axis	Indexing accuracy	20"
	Repeatability	4"
Inclination axis	Indexing accuracy	60"
	Repeatability	4"
	Tilting angle	- 35 ° ~ +110°
Net weight		155kg
* Note: The length of servo motor guard plate varies with different servo motors.

5 Axis Rotary Table TRNC-255
Model		TRNC-255
Worktable diameter		255
Table height (horizontal position)		315
Overall height (vertical position)		395
Table center height (vertical position)		235
Center bore diameter		40 H7
Spindle hole diameter		32
Width of T-slot		12 H7
Width of guide-block		18 h7
Servo motor (Model as required)		Rotary		Inclination
		Fanuc	Meldas	Fanuc	Meldas
		3	HA40	3	HA40
Total seed reduction ratio		1:360		1:360
Minimum input increment		0.001°		0.001°
Table rotation speed		8.33rpm		8.33rpm
Load capacity	0° tilting angle (kg)	100
	0°~90° tilting angle (kg)	50
	Movable load movement on the table	16
Inertia force		6.4
Max. torque of worm gear		48
Max. diameter of wordpiece		255
Rotation axis	Clamping torque (kg-m)	50 (hydraulic pressure 35kg/cm²)
	Indexing accuracy	15
	Repeatability	4
Inclination axis	Clamping torque (kg-m)	50 (hydraulic pressure 35kg/cm²)
	Tilting accuracy	60
	Tilting angle	110°
Net weight		285
* Note: The length of servo motor guard plate varies with different servo motors.

5 Axis Rotary Table TRNC-320
Model		TRNC-320
Worktable diameter		320
Table height (horizontal position)		350
Overall height (vertical position)		450
Table center height (vertical position)		280
Center bore diameter		100 H7
Spindle hole diameter		100
Width of T-slot		14 H7
Width of guide-block		18 h7
Servo motor (Model as required)		Rotary		Inclination
		Fanuc	Meldas	Fanuc	Meldas
		8i	HA80	12i	HA100
Total seed reduction ratio		1:180
Minimum input increment		0.001°
Table rotation speed		16.6rpm
Load capacity	0° tilting angle (kg)	200
	0°~90° tilting angle (kg)	100
	Movable load movement on the table	89.7
Inertia force		26
Max. torque of worm gear		120		185
Max. diameter of wordpiece		320
Rotation axis	Clamping torque (kg-m)	85 (hydraulic pressure 35kg/cm²)
	Indexing accuracy	15
	Repeatability	4
Inclination axis	Clamping torque (kg-m)	145 (hydraulic pressure 35kg/cm²)
	Tilting accuracy	60
	Tilting angle	-25° ~ +125°
Net weight		711
* Note: The length of servo motor guard plate varies with different servo motors.

Relative Product: