CNC Tilting Table

Home > Products > 4 1/2 Axis Rotary Table (Hydraulic Locking)

4 1/2 Axis Rotary Table / TMRNC-255 / TMRNC-320 / TMRNC-400

• Rotary table diameters 255, 320 and 400mm. (Hydraulic locking)
• Manual tilting CNC rotary table.
• Exclusive dual lead worm drive.
• Suitable for 4 1/2 axis machining, such as cutting tool machining.

 

Specification Unit: mm

CNC Tilting Table TMRNC-255

Model		TMRNC-255
Worktable diameter		255
Overall height (horizontal position)		230
Center hight (vertical position)		210
Overall height (vertical position)		See above drawing
Through hole diameter		40 H7
T-slot size		12 H7
Width of guide-block		18 h7
Servo motor		Rotary	Inclination
	MDLDAS	HA-43	Manual
	FANUC	3/AC-0
Teeth ratio		1/180	------
Minimum input increment		0.001°	------
Max. rotation speed (r.p.m)		16.6	------
Load capacity	0° tilting angle (kg)	150
	0°~90° tilting angle (kg)	80
Tilting angle		0°~105°
Rotary	Clamping torque (kg-m)	48
	Indexing accuracy (sec)	15"
	Repeatability (sec)	4"
	Clamping torque (sec)	Manual
Inclination	Min.indexing accuracy	Manual
Net weight (motor excluded)		130
Load capacity	Vertical (kg)	100
	Horizontal (kg)	250

CNC Tilting Table TMRNC-320

Model		TMRNC-320
Worktable diameter		320
Overall height (horizontal position)		380
Center hight (vertical position)		270
Overall height (vertical position)		665
Through hole diameter		40 H7
T-slot size		14 H7
Width of guide-block		18 h7
Servo motor		Rotary	Inclination
	MDLDAS	HA-100	Manual
	FANUC	12
Teeth ratio		1/180	------
Minimum input increment		0.001°	------
Max. rotation speed (r.p.m)		11.1	------
Load capacity	0° tilting angle (kg)	200
	0°~90° tilting angle (kg)	130
Tilting angle		0°~105°
Rotary	Clamping torque (kg-m)	85
	Indexing accuracy (sec)	15"
	Repeatability (sec)	4"
	Clamping torque (sec)	Manual
Inclination	Min.indexing accuracy	Manual
Net weight (motor excluded)		230
Load capacity	Vertical (kg)	150
	Horizontal (kg)	350

CNC Tilting Table TMRNC-400

Model		TMRNC-400
Worktable diameter		400
Overall height (horizontal position)		415
Center hight (vertical position)		310
Overall height (vertical position)		See above drawing
Through hole diameter		40 H7
T-slot size		14 H7
Width of guide-block		18 h7
Servo motor		Rotary	Inclination
	MDLDAS	HA-100	Manual
	FANUC	12
Teeth ratio		1/180	------
Minimum input increment		0.001°	------
Max. rotation speed (r.p.m)		11.1	------
Load capacity	0° tilting angle (kg)	300
	0°~90° tilting angle (kg)	150
Tilting angle		0°~105°
Rotary	Clamping torque (kg-m)	170
	Indexing accuracy (sec)	15"
	Repeatability (sec)	4"
	Clamping torque (sec)	Manual
Inclination	Min.indexing accuracy	Manual
Net weight (motor excluded)		330
Load capacity	Vertical (kg)	---
	Horizontal (kg)	---

TOP