CNC Rotary Table

Home > Products > CNC Rotary Table

CNC Rotary Table / VRNC-125 / VRNC-170 / VRNC-210

• Worktable diameter Ø125, Ø170, Ø210 mm.
• Motor is mounted at the right. (vertical and Horizontal applications)
• Employs high precision cross roller bearing.
• Exclusive dual lead worm drive.
• Air operated.

Specification Unit: mm

Rotary Table VRNC-125

Model		VRNC-125
Worktable diameter		125
Table height (horizontal)		152
Center height (vertical)		110
Center bore diameter		25 H7
T-slot size		12 H7
Guide block size		14 h7
Number of worm gear teeth		48
Cumulative indexing accuracy		Max. 40"
Repeatability		4"
Clamp torque & Clamp method		8kg-m (pneumatic pressure 5kg/cm2)
Load capacity	Vertical	50kg
	Horizontal	100kg
	Tail-stock used	100kg
Allowable inertia force		2kg-cm-sec2
Allowable turntable torque		8.5kg-m
Net weight (motor excluded)		25kg
Servo motor (model excluded)		FANUC	MELDAS
		1/2	HA23/HA33
Speed reduction ratio		1/90
Minimum input increment		0.001°
Table rotation speed		33.3 r.p.m. (motor 3000 r.p.m.)
* Note: The length of servo motor guard plate varies with different servo motors.

Rotary Table VRNC-170

Model		VRNC-170
Worktable diameter		170
Table height (horizontal)		152
Center height (vertical)		135
Center bore diameter		35 H7
T-slot size		12 H7
Guide block size		18 h7
Number of worm gear teeth		72
Cumulative indexing accuracy		Max. 20"
Repeatability		4"
Clamp torque & Clamp method		8kg-m (pneumatic pressure 5kg/cm2)
Load capacity	Vertical	75kg
	Horizontal	150kg
	Tail-stock used	150kg
Allowable inertia force		4.9kg-cm-sec2
Allowable turntable torque		15kg-m
Net weight (motor excluded)		38kg
Servo motor (model excluded)		FANUC	MELDAS
		AC OS, 3	HA43NT-E30
Speed reduction ratio		1/90
Minimum input increment		0.001°
Table rotation speed		33.3 r.p.m. (motor 3000 r.p.m.)
* Note: The length of servo motor guard plate varies with different servo motors.

Rotary Table VRNC-210

Model		VRNC-210
Worktable diameter		210
Table height (horizontal)		152
Center height (vertical)		160
Center bore diameter		45 H7
T-slot size		12 H7
Guide block size		18 h7
Number of worm gear teeth		72
Cumulative indexing accuracy		Max. 20"
Repeatability		4"
Clamp torque & Clamp method		16kg-m (pneumatic pressure 5kg/cm2)
Load capacity	Vertical	75kg
	Horizontal	150kg
	Tail-stock used	150kg
Allowable inertia force		4.9kg-cm-sec2
Allowable turntable torque		15kg-m
Net weight (motor excluded)		43kg
Servo motor (model excluded)		FANUC	MELDAS
		AC OS, 3	HA43NT-E30
Speed reduction ratio		1/90
Minimum input increment		0.001°
Table rotation speed		33.3 r.p.m. (motor 3000 r.p.m.)
* Note: The length of servo motor guard plate varies with different servo motors.

TOP